sales@pulsarlight.com+44 (0) 1223 403 500

RDM – Remote Device Management

What is RDM?   RDM (remote device management) is a protocol designed by Artistic Licence to enable two-way communication over DMX. It might sound complicated, but in practice it’s quite straightforward and can be an invaluable tool for lighting designers. Having two-way communication means that the lighting fixtures can send data back to the controller rather than just receiving commands. To use RDM, you just connect your DMX light fixtures and controllers as you normally would. The only difference is that to use RDM, both the controllers and light fixtures must be RDM compatible. Once the system is connected, your controller will recognise the RDM fixtures connected to it and will give you access to several parameters that can be accessed from RDM (called PIDs). What these are varies depending on the fixture but there are certain PIDs that are standardised across different manufacturers. Find out useful information about a fixture Change the DMX address

LuxEOS VIVID COLOUR

A Bigger Colour Palette   LuxEOS Vivid Colour light engines are custom designed by Pulsar to give you all the colours that you need. From striking bold primary colours to subtle pastel shades, our four colour light engines have it covered. We use a deep blue LED source which gives the Vivid Colour light engines an especially wide colour gamut (the range of colours a light can produce), particularly extending the range of blue, magenta and cyan colours and making it possible to create deeper shades than with many other LED luminaires. Another thing that sets Vivid Colour apart is the high quality white light LED source, which we carefully chose to compliment the coloured LEDs either to create white light or mixed colours. Vivid Colour light engines use 90+ CRI white light sources. Combined with the wide gamut colour mixing, this makes it possible for lighting designers to create subtle pastel shades with a very high level of detail and clarity. We carefully